Which Installation?
Freestanding, built into a deck, or set into an alcove with a finished edge?
Factory-backed supply · Foshan, China
Solid Surface Bathtubs for B2B Sourcing
Five buyer-facing directions: freestanding, built-in, compact soaking, colored and translucent, and custom cast tubs. Bathware in this range is cast at our own base in Foshan, so shape, wall section, color and finish are controlled against one production record rather than bought in and rebranded.
Solid surface bathtub types
Solid Surface Bathtub Types
Choose by how the tub meets the room, how much space it occupies and how the material is finished. Freestanding and built-in are different products, not the same tub installed differently.
01
Freestanding Solid Surface Bathtubs
Sculpted tubs finished on all sides, where floor space and filler position are planned around the tub.
02Built-In Solid Surface Bathtubs
Tubs set into a deck, alcove or surround, where the finished edge and access panel are part of the build.
03Compact Soaking Bathtubs
Deeper, shorter tubs for small bathrooms, guest rooms and apartments where length is limited.
04Colored & Translucent Bathtubs
Pigmented and light-transmitting castings where color reference and finish are agreed before production.
05Custom Solid Surface Bathtubs
Drawing-based shapes, lengths and wall sections for projects that no standard model fits.
Specification control
Key Product Specifications
Confirm these details before treating two bathtub quotations as comparable. Two tubs of the same external length can be very different products.
| Dimensions | External length, width and height, internal bathing well and water depth |
|---|---|
| Material & section | Solid surface composition, wall thickness and any reinforcement |
| Finish | Surface finish, color reference, translucency where applicable and repairability |
| Drain & overflow | Position, size, waste type, overflow arrangement and supplied components |
| Weight & handling | Filled and unfilled weight, floor loading review and site access |
Quotation readiness
Questions Before Quotation
Which Dimensions?
External size, internal bathing well and the water depth actually usable.
Which Finish?
Surface finish, color reference and whether translucency is required.
Which Waste?
Drain position and size, overflow arrangement and which parts are supplied.
What Floor Loading?
Filled weight against the floor structure, especially above ground level.
Which Destination?
Crating, edge protection, labeling and destination-market requirements.
B2B coordination
B2B Project Support
WNS Global organizes bathtub information so a quotation can be written against one model and one finish rather than a general product family.
- Model referenceMatch images or drawings to a castable shape.
- Dimension scheduleOrganize external size, well and water depth.
- Color approvalAgree the color and finish reference before casting.
- Waste coordinationConfirm drain, overflow and supplied components.
- Room scheduleSeparate repeated room types and quantities.
- Export cratingCoordinate protection and crate arrangement.
For multi-unit projects, provide room types, tub dimensions, color schedules, waste positions, quantities and phased delivery requirements. Commercial and delivery conditions remain subject to confirmation.
Custom development
OEM / ODM Customization
Custom tubs depend on the shape, mould feasibility, wall section, color, quantity and production schedule. A new shape is a tooling decision, not a size change, and is reviewed before it is quoted.
Shape and Dimensions
Length, width, height, bathing well profile and wall section.
Color and Finish
Pigment reference, translucency, surface finish and approval sample.
Branding and Packing
Marks, documentation, crating and destination labeling.
A reference image is not a complete specification. Drawings, wall sections, color samples, waste details and approval pieces should be confirmed before production.
Product-level review
Quality Control and Compliance
Bathtub quality should be checked against the approved drawing and the agreed color reference. Documentation varies by material, configuration and destination market.
- Check external dimensions against the approved drawing
- Review surface finish, color consistency and visible condition
- Confirm wall section and edge profile at stated points
- Verify drain and overflow positions and supplied components
- Inspect crating, edge protection and marking before dispatch
Plumbing listings and destination-market documents must be verified against the exact model and target country before any compliance claim is made. We do not hold third-party plumbing listings such as cUPC for our bathtubs.
Project fit
Solid Surface Bathtub Applications
Hotels and Hospitality
Suite and guest-room tubs with repeatable dimensions and service planning.
Residential Developments
Repeatable models and waste positions across multiple units.
Retail and Distribution
Identifiable models, stated dimensions and packing information.
Interior Design Projects
Selected shapes, colors and finishes coordinated with the room.
Renovation Projects
Compact and replacement tubs chosen around existing services and access.
Product definition
What Is a Solid Surface Bathtub?
A solid surface bathtub is cast from a mineral-filled composite rather than formed from sheet acrylic or enameled metal. The same material is sold under several trade names: stone resin in the United States and United Kingdom, stone bath in Australia, and artificial stone in older catalogs. The material is solid through its section, which is why the surface can be repaired rather than replaced.
The term does not describe one recipe or one performance level. Confirm the composition, wall thickness, finish, color reference and supplied waste components for the specific model rather than assuming they follow from the material name.
Compare bathtub types →
Side-by-side review
Solid Surface Bathtub Comparison
Compare installation, footprint, material treatment and supply format without assuming unsupported performance differences.
| Topic | Option A | Option B |
|---|---|---|
| Installation | Freestanding: finished all round, filler planned separately | Built-in: deck or alcove, edge and access panel are site work |
| Footprint | Full-length tub: bathing length across the floor | Compact soaking: shorter footprint, greater water depth |
| Material treatment | Solid color: consistent through the section | Translucent: pigment and light transmission agreed by sample |
| Supply | Standard model: stated dimensions and components | Custom casting: approved drawing and mould feasibility |
Buyer checklist
How to Choose a Solid Surface Bathtub
Start with the room, the services and the floor, then define the product and the commercial requirement.
Room and Services
- Measure the clear floor area and access route
- Confirm waste position, size and overflow arrangement
- Check filler type: floor-standing, wall or rim
- Review filled weight against the floor structure
Product and Supply
- State external dimensions and required water depth
- Agree color reference and surface finish
- List supplied waste and overflow components
- State quantity and destination market
Buyer verification
Buyer Verification Information
WNS Global is the public brand of Foshan WNS Sanitary Ware Co., Ltd. Solid surface bathware in this range is cast at our own base in Foshan, so a buyer deals with the bathtub manufacturer directly rather than through an intermediary.
Model drawings and dimension schedulesColor and finish approval referencesCrating information before confirmationAvailable compliance documents by product
Testimonials, badges, certifications and project statistics must be supported by WNS records.
Buyer questions
Solid Surface Bathtub FAQ
Answers below describe sourcing scope. Product-specific details remain subject to confirmation.
They are regional trade names for the same family of mineral-filled composite castings. Composition and wall section still differ between products, so confirm those at model level rather than relying on the name.
Custom lengths and shapes can be reviewed. A new shape requires tooling, so feasibility depends on the drawing, quantity and production schedule rather than on the size alone.
Yes for selected models. Color and translucency are agreed against an approval sample before casting, because a screen image is not a color reference.
It depends on the supply scope. Every quotation states whether the waste, overflow and filler are included or excluded.
Solid surface is solid through its section, so surface damage can usually be sanded and polished by a qualified repairer. The result depends on the finish and the extent of the damage.
No. We do not hold third-party plumbing listings such as cUPC for our bathtubs. Requirements vary by destination market and must be verified against the exact model before any compliance claim is made.
Product enquiry
Request a Solid Surface Bathtub Quote
Tell WNS Global which bathtub you are sourcing. Include the model or reference, external dimensions, installation type, color and finish, waste requirements, estimated quantity and destination market.
- E-mail: tong.li@wns-global.com
- WhatsApp / WeChat / Telephone: +86 178 2555 7838
- Unconfirmed details can be explained in Your Request
Learn before you buy
Buying Guides
Freestanding Bathtub Buying Guide
What to settle before the shape, and what the shape then decides.
What Is a Solid Surface Bathtub?
The material, the trade names, and what each one actually tells you.
Bathtub Sizes and Dimensions
External size, bathing well and water depth are three different numbers.
Solid Surface vs Acrylic Bathtubs
Two materials, two repair stories, two cost structures.
Bathtub Compliance by Market
Which documents each destination expects, and which ones do not exist.
Bathtub Packaging for Safe Shipping
Where damage actually happens between the mould and the room.