What Starts a Quote?
Send plans, elevations, BOQ, room schedule, quantities, destination and market requirements.
Drawing-based sourcing · Foshan, China
Project & Custom Bathroom Vanity Manufacturer
Room types aligned through one approval process
WNS Global supports drawing-based bathroom vanity sourcing for hotels, apartments, villas, retail developments and multi-unit projects. Approved dimensions, basin layout, plumbing alignment, storage, finish references, packaging and technical revisions are coordinated before production. Cabinets in this range are produced at our own base in Foshan, so drawings are approved with the people who will build them rather than through an intermediary.
The sourcing benefit is traceability: connect each room type to its approved drawing, configuration, label and packing requirement.
Configuration range
Project Vanity Types
Choose by room type, mounting, basin count and installation plan. Final dimensions, construction, finishes and components require approved project documents.
Hotel and Project Bathroom Vanities
Room-schedule vanities coordinate approved dimensions, basin position, storage, finish references, labels and packing across repeated and special bathroom types.
Discuss this configuration →
Custom Bathroom Vanities
Drawing-based units align non-standard openings, cabinet layout, plumbing access, countertop, basin, hardware, mirror coordination and written approval requirements.
Discuss this configuration →
Wall-Mounted Project Bathroom Vanities
Floating configurations require approved mounting height, wall support, plumbing alignment, cabinet depth, storage and installer coordination for each room type.
Discuss this configuration →
Floor-Standing Project Bathroom Vanities
Floor-supported layouts coordinate footprint, baseboard, wall variation, plumbing routes, storage access, countertop fit and finished-floor conditions before approval.
Discuss this configuration →
Single-Sink Project Bathroom Vanities
Single-basin layouts suit defined room types where centerline, usable countertop, drawers, doors, plumbing cut-outs and mirror relationship are confirmed.
Discuss this configuration →
Double-Sink Project Bathroom Vanities
Double-basin configurations require confirmed basin spacing, service positions, cabinet divisions, countertop support, storage access and mirror or lighting coordination.
Send project brief →Specification control
Product Specifications
Use the approved drawing, room schedule and finish reference as the common purchasing, production and installation record.
| Project type | Confirm by approved project brief | Cabinet construction | Confirm by approved product drawing |
|---|---|---|---|
| Mounting type | Confirm by approved product drawing | Width, depth and height | Confirm by approved product drawing |
| Basin configuration | Confirm by approved product drawing | Countertop option | Confirm by approved product drawing |
| Basin position | Confirm by approved product drawing | Plumbing cut-out | Confirm with MEP information |
| Storage layout | Confirm by approved product drawing | Mirror coordination | Confirm by approved room elevation |
| Finish reference | Confirm against approved sample | Hardware | Confirm by approved component list |
| Packaging | Confirm by approved order | Room identification | Confirm project coding requirement |
| Drawing and sample status | Record approved revision | Target market | Confirm project requirements |
Buyer decisions
Common Sourcing Questions
Start with room information, then approve the coordinated vanity.
Can Sizes Follow Room Types?
Yes. Separate standard and special sizes with clear quantities and revision control.
Single or Double Basin?
Choose from room width, user plan, plumbing, countertop and storage needs.
What Plumbing Is Needed?
Show supply, drain, trap, wall or floor route and access zones.
Can Components Be Coordinated?
Review cabinet, countertop, basin, mirror cabinet and storage as one room package.
How Is Finish Approved?
Use a named reference or sample with written criteria and revision status.
How Is Production Approved?
Record sample or reference acceptance before releasing the approved batch specification.
Can Packing Identify Rooms?
Confirm codes, carton marks, component grouping and room schedule relationship.
Risk control
Sourcing Risk Support
WNS Global coordinates drawings, references and component questions. Buyer approval and accurate project information remain necessary.
| Risk | WNS Global sourcing response |
|---|---|
| Dimension mismatch | Connect room type and quantity to an approved drawing. |
| MEP or plumbing conflict | Request service positions and cut-out confirmation. |
| Incomplete room schedule | Identify missing types, quantities and revisions before approval. |
| Wrong basin cut-out | Approve basin, countertop and cut-out relationship together. |
| Inconsistent finish | Use one named reference and agreed review criteria. |
| Unsuitable storage | Check drawers, doors, plumbing and daily access on drawings. |
| Component mismatch | Review basin, hardware, mirror and cabinet component list. |
| Packing damage | Agree cabinet, countertop, basin and edge protection. |
| Unapproved change | Apply revision control before production release. |
Private-label and projects
OEM / ODM Services
Technical review is required before quotation. Options depend on the approved project specification.
- Custom width, depth and height
- Cabinet divisions and storage layout
- Single or double basin configuration
- Countertop and basin coordination
- Approved finish reference
- Hardware and mirror-cabinet direction
- Private-label packaging and marks
- Project documents and sample approval
Specifications, compliance, quantities and terms require written confirmation.
Project sequence
Customization Process
Seven actions align room types, components and batch approval.
- 01Send Drawings and Schedules
Share BOQ, room types, quantities, elevations and destination.
- 02Confirm Dimensions and Plumbing
Record cabinet size, services, cut-outs and installation conditions.
- 03Select the Configuration
Define cabinet, basin, countertop, storage and finish.
- 04Review the Technical Drawing
Check dimensions, components, openings and room identification.
- 05Approve Sample or Reference
Record accepted appearance, components and revision status.
- 06Confirm Batch Production
Release approved drawings and written specifications.
- 07Inspect, Pack and Coordinate
Review labels, protection, marks and shipment documents.
Pre-shipment review
Quality Control
Inspection compares the project vanity with the approved drawing, reference and order.
- Approved width, depth and height
- Finish reference and cabinet appearance
- Basin and countertop fit
- Plumbing and hardware cut-outs
- Door and drawer operation
- Hardware and mirror components where included
- Room identification labels where required
- Cabinet, countertop and basin packing
Inspection scope follows the purchase order or approved quality standard. Site installation remains project-specific.
Project fit
Bathroom Applications
Use room schedules and approval records to coordinate repeated and special vanity configurations.
Hotels and Resorts
Guest-room types coordinated through drawings, finishes, room labels and packing instructions.
Apartments
Repeated units aligned with plumbing, dimensions, storage and approved component schedules.
Villas
Room-specific configurations reviewed around architecture, finishes, basins and mirror coordination.
Retail Developments
Public and staff bathroom vanities coordinated with project specifications and maintenance access.
Serviced Residences
Hospitality and residential requirements aligned through room types and approval records.
Renovation and Refurbishment
Existing walls, plumbing and finished openings measured before custom drawing approval.
Product definition
What Are Project and Custom Vanities?
Project and custom bathroom vanities are specified against drawings, room types, installation conditions and an approval process instead of only a fixed retail size.
They may coordinate cabinet dimensions, basin, countertop, plumbing, storage, mirror and packaging. Each element remains subject to approved project documents.
Custom does not remove the need for technical confirmation, site measurement, local review or installation planning.
Decision guide
Bathroom Vanity Comparison
Choose by drawing fit, component scope, batch control and installation planning.
| Option | Drawing fit and customization | Basin and installation planning | Batch, packing and verification |
|---|---|---|---|
| Project and custom vanities | Specified by approved room types and drawings | Basin, services and installation coordinated per project | Revision, labels and packing require project control |
| Standard-size vanities | Selected from defined dimensions and configurations | Site must accommodate the available product | Verify model, components and standard packing |
| Bathroom vanity sets | Coordinated cabinet, basin and related package | Set relationships need room and service review | Verify included components, finish and grouped packing |
| Cabinet-only options | Cabinet scope may simplify or separate sourcing | Basin, countertop and cut-outs require external coordination | Verify interface responsibility and package scope |
RFQ checklist
Sourcing Selection Checklist
Copy these points into the quotation request and identify the technical approver.
- Project countryState location and target-market requirements.
- DrawingsAttach plans, elevations and vanity details.
- Room scheduleList quantity by room type.
- DimensionsProvide width, depth, height and site limits.
- Wall and plumbingShow support, supply, waste and access.
- Basin and countertopDefine configuration and cut-outs.
- Finish and storageAttach references and cabinet layout.
- Mirror requirementState mirror or mirror-cabinet coordination.
- PackagingDefine room codes and component grouping.
- DestinationProvide delivery location and handling scope.
- Approval timelineIdentify drawing, sample and revision decisions.
Factory-backed coordination
Work With WNS Global
WNS Global provides factory-backed sourcing communication from Foshan, China.
Developers, contractors, distributors and private-label buyers can send BOQs, drawings, room schedules, finish references, quantities, technical needs and target-market requirements for review.
Specifications and commercial terms require written project confirmation.
About WNS Global
Buyer questions
Project Bathroom Vanity FAQ
Project-specific answers remain subject to approved drawing and project confirmation.
Yes, subject to technical and commercial review. Send bathroom elevations, plans, vanity details, BOQs, room schedules, quantities and target-market requirements.
Yes. Separate each room type, quantity and dimension, then identify standard and special units for drawing, labeling and packing review.
Mark basin centerlines, countertop relationships, faucet direction, cut-outs and cabinet divisions on the approved drawing before production release.
Provide supply and drain positions, wall or floor routes, traps, access needs and any site constraints. Final plumbing remains project-specific.
Sample or reference approval may be included subject to technical and commercial confirmation. Record approved dimensions, appearance, components and revision status.
Use an approved finish reference, identify acceptable review criteria and compare production checks with the purchase order or agreed quality standard.
Room, type or project labels can be reviewed. Confirm the coding structure, carton marks, component grouping and packing instruction in writing.
Yes, subject to confirmation. Share branding, packaging, documentation, quantities, drawings, destination, technical needs and approval responsibilities.
Learn before you buy
Buying Guides
Two-Dimensional Hole Center Pattern Matcher
Compare two hole-center patterns after a stated rotation and offset. Find a one-to-one correspondence within your radial tolerance, not a mechanical-fit approval.
Drawer Slide Overtravel: Will the Back of the Drawer Clear the Top?
Slide length, full extension and over-travel are different things. Check where travel is measured and compare it with any top overhang before ordering.
Rectangular Panel Grid Yield Estimator
Estimate identical rectangular parts per sheet using your trim margins and saw kerf, with grain-locked or uniformly rotated layouts. This is not optimized nesting.
Rectangular Cutout Layout Checker
Calculate rectangular cutout edge margins, overlap, boundary contact and separation within a rectangular top. No material strength or minimum bridge is assumed.
Quarter-Turn Door Swing Geometry Checker
Check whether rectangular obstacles intersect an ideal zero-thickness door sweep through 90 degrees. Handles, hinges, height and installation clearance are excluded.
Drawing Inches and Millimeters Converter
Convert decimal or fractional inches and millimeters, then show the signed change from rounding to a selected inch fraction. Nominal pipe sizes are excluded.
Countersunk vs Pan-Head Cabinet Fixings: Match the Seat
A countersunk head is made for a countersink; a pan head bears on the surface. Match the head to the fitting maker’s named screw and hole type.
Corrugated ECT, Burst and Box Compression: Match the Evidence
ECT and burst tests are run on corrugated board; compression, stacking and drop tests are run on the box. Match each report to the question you are asking.
Veneer Core Telegraphing: What Lies Under the Finished Face?
Telegraphing is makers’ term for the core showing through a thin veneer face. Ask what crossband sits under the face, not only the species and ply count.
Side-Mount to Undermount Drawer Slides: Can the Box Be Reused?
A side-mount drawer box suits undermount slides only if its width, side thickness, bottom recess, back and length match the new slide’s own document.
Thermofoil vs Melamine Vanity Fronts: Identify the Surface System
Thermofoil is a plastic film pressed with heat over a board; melamine is resin paper fused to a flat board. Check film, core, edges, back and heat limits.
Threaded Insert vs Wood Screw in a Vanity Panel
A wood screw threads into the board itself; a threaded insert adds a machine thread. Specify both joints: bolt to insert, and insert to board.
Synchronized Woodgrain Texture vs All-Over Embossing
Pfleiderer defines a synchronized woodgrain texture as embossed in register with the print; EGGER’s all-over textures have their own pore pattern.
Can a Matte Vanity Surface Be Repaired With Heat?
Heat repair is a maker-specific method for a named surface and the marks its maker names. See what FENIX, Formica and others state, and what to ask.
Spare Parts Stock Ledger
Track one exact spare part through receipts and issues in the order they happened, flag any negative balance on the way and compare with a physical count.
Backward Project Date Planner
Count back from a target date through stages whose durations you enter, in calendar days. No factory lead time, transit time or holiday is assumed.
Phased Order Allocation Checker
Check that phase or building allocations add up to each approved order line, with revisions and units kept apart and conflicting totals flagged.
Drawing Tolerance Range Checker
Check measured values against the lower and upper limits on your approved drawing. Values on a limit count as within; the result is not an inspection approval.
Thin Vanity Fronts Need a Compatible Fixing System
A thin vanity front may be too thin for a drilled hinge cup. Check the real panel build against the hardware maker’s thickness range and material list.
Postformed Laminate vs Edgebanded Vanity Corners
A postformed corner bends one laminate sheet around the edge; an edgebanded corner adds a separate strip. Compare the section, laminate grade and ends.
Laminate Balancers and Vanity Panel Flatness
A laminate balancer is the sheet on the back of a faced panel. See what EGGER, CPA and AWI ask of it, and what to record before approving a vanity panel.
Rotary, Plain-Sliced and Quarter-Cut Vanity Veneer
Rotary, plain-sliced and quarter-cut veneer differ in how the log meets the knife. Compare grain figure and leaf width, then specify cut, match and grade.
Reading Wood Moisture Records for Bathroom Vanities
A wood moisture reading depends on the meter type, species setting, temperature and spot. What to record and what one reading can show for a vanity order.
Sample Approval Scope Record
Record what a labeled sample was checked for, criterion by criterion, what is on hold and where the evidence is kept. One visual approval is not full approval.
Packing Volume and Gross Weight Calculator
Work out carton volume in m³ and gross weight in kg from outside packed dimensions and carton counts. Incomplete lines stay out of the totals.
Supplier Quote Comparison Worksheet
Line up received offers by specification, quantity, unit, currency, trade term and inclusions, and see where their bases differ. No supplier ranking.
Cabinet Panel Thickness: Nominal Core vs Finished Assembly
A quoted panel thickness may describe the core, the faced panel or the finished part. Ask which one, and which tolerance applies, before comparing quotes.
Veined Solid Surface: Approve the Top and Seam Layout
Corian says the pattern in its veined solid surface runs along the sheet, breaks at seams and differs on the edge. Approve a marked layout, not a chip.
How Many Hinges Does a Vanity Door Need?
Blum says door weight, handles included, is as a rule the key factor in hinge count; width and height also change it. Read the guidance for the exact hinge.
Vanity Edgebanding: EVA, PUR and Zero-Joint Processes
EVA and PUR are hot melts that glue an edge strip on; a zero-joint edge melts a functional layer on the strip instead. Ask for board, strip and process.
Build a Vanity Component and Order-Scope Brief
Turn one vanity room type into a component-by-component request: cabinet, top, basin, mirror and drawings, with anything still undecided clearly marked.
Book Match, Slip Match and Sequence Match for Vanity Fronts
Book and slip match set how veneer leaves meet within one front. Sequence match keeps panels in order across fronts. Put both on a numbered elevation.
Compact Laminate vs HPL-Faced Board: Compare the Actual Assembly
HPL-faced board is thin laminate bonded to a core; compact laminate is the whole panel. Compare thickness, edges, backs and fasteners before accepting a swap.
Can a Handleless Vanity Drawer Be Push-to-Open and Soft-Close?
Yes, with one hardware system made for both. Specify the opening action, the closing action, the named system and its front gap, then approve a sample.
Is a Load Rating Enough for a Wide, Shallow Vanity Drawer?
A drawer load rating states a weight under stated test conditions. For a wide, shallow vanity drawer, also check width limits and stabilising parts.
Vanity Hinge Overlay and Opening Angle Are Different Decisions
Hinge overlay fixes where a closed vanity door sits; opening angle fixes how far it swings. Makers list one overlay at several angles, so specify both.
Finger Joints, Edge Glue Lines and Clear-Finish Vanity Parts
A finger joint adds length; an edge glue line, as this guide uses the term, adds width. How to approve either joint under a clear finish.
Does More Ply Count Mean Better Vanity Plywood?
Ply count alone doesn’t rank vanity plywood. Compare thickness, inner-ply material, face grade and bond class for the same part, and read edge samples fairly.
Particleboard or MDF? Checking the Core Behind a Vanity Finish
Particleboard is bonded particles and MDF is bonded fibers. Check a labeled cut edge, then confirm the panel product and grade on paper for each part.
Hotel Bathroom Vanity Specification
Specify for the maintenance team, not for a careful owner.
Bathroom Vanities for Apartment Projects
Small, numerous, identical. Each pulls a different way.
How to Evaluate a Bathroom Factory
Assess control, not presentation. Five questions that predict the order.
Importing Bathroom Products: A Checklist
Six stages, six common failures, all decided before production.
Formaldehyde Standards for Bathroom Furniture
E0, E1, CARB and TSCA are not the same thing. Which one binds you.
How to Read a Product Certificate
Most problem certificates are genuine. They just cover something else.
What Does “Paint-Free Board” Mean in a Vanity Quote?
Project inquiry
Request Project & Custom Bathroom Vanity Details
Send drawings, room schedule, dimensions, plumbing, basin and countertop needs, finish reference, quantities, destination and target-market requirements.
- WhatsApp+86 178 2555 7838
- Emailtong.li@wns-global.com