Which Configuration Fits?
Select a single, double, custom-length, wall-to-wall or project top according to cabinet run, bowl layout, support and plumbing plan.
Factory-backed sourcing · Foshan, China
Wholesale Integrated Basins & Vanity Tops
Integrated basin and vanity tops for importers, distributors, developers, hospitality teams, contractors, showroom buyers and project specifiers. Confirm overall length, depth and height, bowl count and position, drain centers, faucet interface, end detail, cabinet support, wall condition, overflow status where confirmed and finish reference against an approved drawing, sample, technical sheet or confirmed model.
Integrated Basins & Vanity Tops are coordinated wash surfaces for cabinet runs and bathroom projects. WNS Global supports practical B2B requirements review, document alignment and export communication from Foshan, China. Final values remain subject to approved specification. This line is produced at our own base in Foshan, so a buyer deals with the sanitary ware manufacturer directly rather than through an intermediary.
- Top-led selectionConfirm dimensions, bowl layout, drain centers, faucet interface and cabinet support together.
- Site coordinationAlign plumbing points, wall condition, end detail and approved drawing revision before approval.
- Document controlUse an approved drawing, sample or technical sheet to define the order scope.
Configuration range
Integrated Basin & Vanity Top Types
Select bowl count, length, wall condition and cabinet support first, then confirm drain centers, faucet interface, end detail and surface reference.
Single-Bowl Vanity Tops
An integrated top for a one-user cabinet and coordinated faucet position.
Explore Solid Surface Basins →
Double-Bowl Vanity Tops
A shared vanity-top solution planned around bowl and drain spacing.
Explore Solid Surface Basins →
Custom-Length Vanity Tops
A drawing-led top for controlled cabinet runs and wall conditions.
Explore Solid Surface Basins →
Wall-to-Wall Basin Tops
A continuous top planned around wall measurement and installation support.
Explore Solid Surface Basins →
Project Vanity Tops
Repeatable top-and-basin packages for room-type specifications.
Explore Solid Surface Basins →Specification control
Integrated Basins & Vanity Tops Specifications
Approve a top drawing that locates each bowl, drain opening and faucet interface from fixed edges. Cabinet support and the finished wall are separate approval points; a styled room photo cannot establish whether the top will fit.
What buyers should confirm: overall length, depth and height; bowl count and position; drain centers; faucet interface; end detail; cabinet support; wall condition; overflow status if confirmed; surface or finish reference; and documents to confirm.
| Overall length, depth and height | Available / confirm per model | Bowl count and position | Confirm against approved drawing |
|---|---|---|---|
| Drain centers | Confirm per selected configuration | Faucet interface and end detail | Confirm with plumbing plan |
| Cabinet support and wall condition | Confirm with responsible trade | Overflow status if confirmed | Confirm per selected configuration |
| Surface or finish reference | Confirm with approved reference | Project documents to confirm | Drawing, sample, technical sheet and quotation |
| Packing and labels | Confirm order-specific protection, labels and document needs before order approval | ||
Buyer decisions
Common Sourcing Questions
Review the complete basin-and-cabinet package, not just the visible surface.
What Site Data Is Needed?
Provide finished length, depth, height, cabinet support, wall condition, drain and water centerlines, faucet reference, end detail and installation responsibility.
Which References Need Approval?
Confirm surface reference, bowl layout, drain and faucet interface, end detail, overflow status and supplied component scope.
What Belongs on the Drawing?
Show dimensions, bowl position, drain centers, faucet interface, end details, cabinet support, wall condition, surface reference and responsible approver.
What Must the Buyer Verify?
The buyer or project team should verify destination-market requirements for structure, water connection, drainage and installation.
Risk control
Sourcing Risk Support
WNS Global can support requirements, drawing or sample review, packing alignment and issue escalation. The buyer remains responsible for local structure, services, installation suitability and site access.
| Risk to control | Pre-order sourcing response |
|---|---|
| Drain, water and faucet positions | Confirm drain, water and faucet positions plus finished height before drawing approval. |
| Faucet reach and bowl spacing | Review faucet reach, bowl spacing and drawer clearance with the responsible trade. |
| Cabinet flatness, support and wall condition | Confirm cabinet flatness, support and wall condition before approval. |
| Site dimensions and end details | Confirm site dimensions and end detail with the project team. |
| Approved drawing revision | Lock the approved drawing revision before order confirmation. |
| Transport handling and installation sequence | Align protective packing, handling and installation sequence. |
Private-label and projects
OEM / ODM Service
Test the proposed length and bowl spacing against the cabinet plan first. Then resolve drain centers, faucet reach, end returns and the visible finish on one revision of the top drawing before discussing packing.
Buyer Provides
Room drawings, dimensions, bowl layout, drain and faucet positions, end details, cabinet support, wall condition, finish reference, quantity, target market and packing request.
WNS Global Reviews
Check the proposed bowl and opening layout against the cabinet, plumbing and support information supplied for this project.
- Approved length, depth, bowl layout and end detail
- Drain centers, faucet interface, cabinet support and plumbing coordination
- Surface or finish reference where approved
- Drawing, sample, labels and packing discussion
Project sequence
Customization Process
Five steps carry the buyer brief through review, confirmation and handover.
- 01Requirement Brief
Start with the room and cabinet drawings, including finished wall dimensions, bowl count, faucet locations and the intended support below the top.
- 02Technical Review
Set bowl centers and drain openings against the cabinet divisions; check the end detail and faucet clearance with the plumbing plan.
- 03Drawing or Sample Confirmation
Approve the top drawing and any agreed finish sample together, so the bowl position and appearance belong to the same order revision.
- 04Production Confirmation
Before release, reconcile the finished top with its cabinet interface and the accepted inspection points for edges and openings.
- 05Documentation and Handover
Label each top to its drawing revision and cabinet location, and protect exposed corners and basin openings for transport.
Order-specific inspection
Quality Control
Inspect the top as an interface, not only as a finished surface: openings, support points and end returns must agree with the same approved drawing before it is packed.
- Compare overall length, depth and each bowl center with the accepted top drawing.
- Check waste and faucet openings against the selected fittings and cabinet layout.
- Inspect exposed edges, inside bowl surfaces and end returns under the agreed finish reference.
- Verify the supported areas and underside interface identified on the drawing.
- Tie each inspected top to its cabinet position and current drawing revision.
- Confirm corner protection and labels before the piece is crated.
Any special test, certificate or local standard remains subject to the selected product and destination-project requirement.
Project fit
Integrated Basin & Vanity Top Applications
Choose the application only after cabinet run, bowl layout, plumbing points, wall condition and support are defined.
Hotel Vanity Runs
Coordinate long tops with room-type cabinet and plumbing schedules.
Explore Solid Surface Basins →
Double Vanities
Plan shared bowls and faucets around the approved user layout.
Explore Solid Surface Basins →
Commercial Restrooms
Use a coordinated wash surface where service points are controlled.
Explore Solid Surface Basins →
Residential Renovations
Replace or specify a top after confirming cabinet and wall dimensions.
Explore Solid Surface Basins →
Product definition
What Are Integrated Basins & Vanity Tops?
Integrated Basins & Vanity Tops combine a basin and top as one coordinated wash surface for a cabinet run or supporting vanity structure. They can use one bowl or two bowls, a standard or custom length, and an open end or wall-to-wall detail. The product is selected to coordinate with cabinet support, wall condition, drain centers, faucet interface, plumbing route, finished dimensions, surface reference and installation sequence. A drawing, approved sample, technical sheet or confirmed model should define final scope. Do not assume a faucet, drain, trap, mirror, cabinet, wall preparation, installation or visible accessory is included unless the written quotation names it.
A styled image does not define supply scope. Confirm faucets, drains, traps, mirrors, plumbing components, installation and visible accessories in the written quotation.
Not the same as
- A complete bathroom set including every visible component
- A substitute for cabinet-support or wall-condition verification
- A substitute for approved drawings and interface data
Decision guide
Integrated Basin & Vanity Top Comparison
Compare single-bowl, double-bowl and custom-length routes by integration, planning variables and drawing verification.
| Approach | Installation or integration | Typical project fit | Buyer confirmation point |
|---|---|---|---|
| Single-bowl vanity top | One-bowl top coordinated with cabinet, drain centers and faucet interface. | Hotel Vanity Runs, guest bathrooms and compact room types. | Length, depth, height, bowl position, drain centers and faucet interface. |
| Double-bowl vanity top | Two-bowl top coordinated with bowl spacing, shared drainage and faucet positions. | Shared residential bathrooms, hotel suites and wider cabinet runs. | Bowl spacing, cabinet support, drain positions and faucet layout. |
| Custom-length or wall-to-wall top | Length and end details coordinated with cabinet run, wall condition and installation support. | Commercial restrooms, renovation work and controlled project runs. | End detail, wall condition, cabinet support, surface reference and supplied scope. |
RFQ checklist
Integrated Basins & Vanity Tops Sourcing Checklist
Attach these points to the inquiry before quotation or purchase-order approval.
- Overall length, depth and heightState finished dimensions for the approved cabinet run.
- Bowl count and positionShow selected bowl count, position and user layout.
- Drain centers and faucet interfaceAttach confirmed drain centers and faucet interface data.
- End detailState open end, return, backsplash or wall-to-wall detail.
- Cabinet support and wall conditionConfirm cabinet flatness, support and site wall condition.
- Overflow statusConfirm overflow status where applicable.
- Surface or finish referenceAttach approved color, surface or finish references where relevant.
- Component scope, packing and labelsState supplied scope and packing or label needs.
- Project documentsShare drawings, samples, technical sheets and latest approved revision.
- Destination-market checksState target market and relevant local requirement checks.
Factory-backed coordination
Work With WNS Global
For an integrated top, WNS Global can coordinate the selected fabrication or sourcing route once the bowl layout, cabinet interface and finish reference are written into the order. A basin photograph does not define the supplied cabinet, faucet or drain.
Inquiry Package
Share room drawings, dimensions, bowl layout, drain and faucet positions, end detail, cabinet support, finish reference, quantity and target market.
Technical Alignment
Review dimensions, bowl layout, end detail, cabinet support, drain and faucet interface, finish reference and supplied scope.
Order Communication
Keep the top drawing, cabinet schedule, finish sample and packing labels on one revision.
Handover
Pass the basin and drain positions to the installer with the top identification and agreed packing record.
Exact product availability, materials, finishes, commercial terms and delivery details remain subject to written confirmation for the selected order.
About WNS Global
Buyer questions
Integrated Basins & Vanity Tops FAQ
Model-dependent points should be confirmed through the selected product reference and approved project documents.
Start with overall length, depth and height, bowl layout, drain centers, faucet interface, end detail, cabinet support and surface reference. Confirm the Integrated Basins & Vanity Tops configuration on the approved drawing.
Share room drawings, dimensions, bowl layout, drain and faucet positions, end detail, cabinet support, finish reference, quantity and the latest revision.
Do not assume they are included. Confirm the exact supplied component scope and the responsible installation party in the approved quotation.
WNS Global can review length, depth, bowl layout, drain and faucet positions, end treatment, surface direction, packaging and drawing approval subject to feasibility, an approved reference and order confirmation.
Inspection follows the agreed order scope, including dimensions, bowl, drain and faucet-interface positions, surface and edge condition, approved revision, components, labels, packing and the technical reference.
The buyer or responsible project team should verify destination-project requirements for structure, water connection, drainage and installation.
Learn before you buy
Buying Guides
Basin Air Admittance Valve: Plan Access Inside the Vanity
An air admittance valve lets air into a basin drain and shuts against drain gas. Inside a vanity it needs an upright position, air and access.
Bathroom Sealant: Match the Formulation to Both Surfaces
Acid-cure and neutral-cure bathroom sealants suit different surfaces. Check the named product’s data sheet against both sides of the joint, stone included.
Can an Indoor Vanity-Top Material Be Used Outdoors?
Not by default. Cosentino does not recommend Silestone outdoors and Cambria is not approved for it, while Caesarstone sells a separate Outdoor range.
Through-Body Veining: What Should a Cut Edge Show?
A cut edge carries the vein only on slab designs made with through-body veining; others show the body color. Check a cut edge of the exact design.
Why Scratches Can Stand Out on Dark Solid Surface
Corian says dark, heavily pigmented solid surface shows scratches, dust and wear more readily. Judge color, finish and care together, not hardness.
Specification Revision Comparison Record
Compare previously approved and proposed values field by field, flag missing baselines and name who reviews each change. Nothing is approved automatically.
Basin Traps: Waterless Membrane vs Water Seal
A water-seal trap blocks drain gas with standing water; a membrane valve closes without water. Compare seal loss, vanity space, access and code acceptance.
What Is an Integrated Basin?
One piece, no joint, and the reason projects keep specifying it.
How to Choose a Vanity Top
Six decisions, and everything is fixed at fabrication.
Quartz vs Marble vs Solid Surface Tops
Hardness and repairability pull in opposite directions. Pick one.
Undermount vs Vessel vs Integrated Sink
Where the bowl meets the top decides cleaning, height and cost.
How Are Bathroom Vanities Made?
Follow the process from drawings and materials through assembly, finishing, inspection, and packing.
Waterjet and CNC Cutting of Vanity Tops: What a Cutting Video Can and Cannot Confirm
Inspecting an Integrated Basin Top: Checks a Photo Cannot Replace
Does the Vanity Top Sample Represent Production? Questions to Ask Before Approval
Before a Vanity Top Is Packed: Condition Record and Protection for Long Tops
Project inquiry Sanitary ware wholesale orders and single project schedules are handled by the same team.
Request Integrated Basin & Vanity Top Details
Use Your Request to share your quantity estimate, drawing, reference photo, required finish, target market or required date where relevant. WhatsApp is the faster contact route for a first discussion.
- WhatsApp+86 178 2555 7838
- Emailtong.li@wns-global.com