Which Configuration Fits?
Start with room type, toilet category, rough-in, required clearance and whether smart-model power or servicing is appropriate for the project.
Factory-backed sourcing · Foshan, China
Wholesale Toilets
Toilets are specified bathroom fixtures for importers, distributors, developers, hospitality procurement teams, contractors, showroom buyers and project specifiers. Start with the toilet category and installation type, then confirm rough-in, overall dimensions and clearance, flush configuration, seat and cover scope, water connection, approved finish or color, smart-model service needs and destination-market requirements.
WNS Global coordinates toilet sourcing with selected production partners. Before confirming a model, compare its outlet orientation and installation kit with the finished-room drawing. The written order distinguishes the pan, seat, flush components and any frame or powered parts actually supplied.
- Category firstChoose standard, slim or smart direction against the bathroom layout and project requirement.
- Site coordinationAlign rough-in, drainage, water connection, clearance and installation responsibility before approval.
- Document controlUse an approved reference to define the ordered model, components, labels and packing.
Configuration range
Toilet Types
Confirm installation, rough-in, flush arrangement and supplied scope before technical or commercial review.
Standard Toilets
A general bathroom toilet category selected around the approved installation and flush specification.
Discuss this category →
Slim Toilets
A compact-profile option for projects with controlled bathroom clearances.
Discuss this category →
Smart Toilets
An enhanced toilet category requiring model-specific power and service confirmation.
Discuss this category →
Project Toilet Packages
Repeatable toilet options reviewed against room-type drawings and market needs.
Discuss project requirements →
Coordinated Bathroom Toilets
A toilet selection aligned with vanity, tile and fixture finish direction.
Discuss this category →Specification control
Toilets Specifications
Confirm the toilet installation route before selecting an appearance. A floor-standing pan, wall-hung assembly or smart model has different rough-in, fixing, water and possible power needs; the selected model schedule defines what ships.
What buyers should confirm: category, installation, rough-in, clearance, flush configuration, seat and cover scope, water connection, smart-model service needs, finish or color and documents to confirm.
| Toilet category | Available / confirm per model | Installation type and rough-in | Confirm against approved drawing |
|---|---|---|---|
| Overall dimensions and clearance | Confirm per selected configuration | Flush configuration or model specification | Confirm in technical sheet |
| Seat and cover scope | Confirm in quotation | Water connection | Confirm with responsible trade |
| Power and service for smart models | Only if model-confirmed | Finish or color | Confirm with approved reference |
| Destination-market requirement | Buyer or project team to verify | Project documents to confirm | Drawing, sample, technical sheet and quotation |
Buyer decisions
Common Sourcing Questions
Set the installation and supplied-scope basis before selecting the visible model.
What Site Data Is Needed?
Share finished dimensions, drain and water-supply positions, floor or wall condition, planned clearance, layout and responsible installation party.
Which References Need Approval?
Confirm selected model, flush arrangement, seat and cover scope, finish or color, supplied components, packing direction and required marking.
What Belongs on the Drawing?
Show overall dimensions, rough-in, drain and water positions, clearance, wall or floor interface, component scope and responsible approver.
What Must the Buyer Verify?
The buyer or project team should verify destination-market plumbing, water, drainage, electrical work for smart models and local installation requirements.
Risk control
Sourcing Risk Support
Toilet selection starts with the drain outlet and installation type, then the model-specific parts that make it usable. WNS Global can coordinate the agreed partner-produced set; the buyer’s site team verifies rough-in, fixing, water and any electrical provision.
| Risk to control | Pre-order sourcing response |
|---|---|
| Rough-in and drain location | Compare the actual floor or wall waste orientation with the chosen pan outlet before a model is accepted. |
| Water-supply position | Match cistern or bidet-seat inlet position to the available supply and name the installer responsible for connection. |
| Floor, wall and clearance condition | For a wall-hung set, verify frame support; for a floor-standing pan, check base area and finished-door clearance. |
| Flush and local requirements | Request the exact flush-component and model documents the destination reviewer needs; do not infer approval from a generic series. |
| Smart-model power provision | If a powered seat is chosen, locate the outlet and isolation method before specifying the seat variant. |
| Seat, packing and final model | List pan, seat, cistern or frame, flush plate and powered parts individually, marking only those included in this order. |
Private-label and projects
OEM / ODM Service
WNS Global coordinates toilet models through production partners. Identify the pan, cistern or concealed frame, flush plate, seat and any smart-model components separately so a pictured bathroom is not mistaken for a complete kit.
Buyer Provides
Room drawings, selected toilet category, rough-in and clearance data, model reference, finish direction, quantity, target market and packing request.
WNS Global Reviews
Match outlet orientation, fixing system and included components to the destination room and selected partner model.
- Selected toilet category, model reference and supplied component scope
- Rough-in, clearance, water connection and smart-model service direction
- Finish, labels, packaging and branding discussion
- Drawing, sample or technical-sheet approval where applicable
Project sequence
Customization Process
Five steps carry the buyer brief through review, confirmation and handover.
- 01Requirement Brief
Send the installation type, finished room drawing, drain rough-in and water-supply location.
- 02Technical Review
Check the chosen model against wall or floor support, clearance, seat and flushing components.
- 03Drawing or Sample Confirmation
Approve the model and component schedule with the responsible trade before placing the order.
- 04Production Confirmation
Confirm the packed pan, seat, flushing parts and any specified frame or plate against that schedule.
- 05Documentation and Handover
Label each kit for the intended room type and pass its technical sheet to the installer.
Order-specific inspection
Quality Control
Review a toilet order as a model-specific set. Missing installation parts or a wrong outlet orientation matter more than an attractive pan photographed without its fittings.
- Verify the pan and outlet type against the approved toilet model.
- Inspect visible ceramic surfaces and fixing areas for transport-relevant damage.
- Check that the seat and cover match the agreed model and finish.
- Separate concealed frame, flush plate or smart parts when they are actually in scope.
- Reconcile carton labels and model documents before shipment.
Any special test, certificate or local standard remains subject to the selected model and destination-project requirement.
Project fit
Toilet Applications
Choose the application only after the plumbing plan, room clearance, model direction and approval responsibilities are defined.
Hotel Guest Rooms
Coordinate durable, repeatable toilet packages with room-type service plans.
Discuss project requirements →
Residential Developments
Match toilet type and clearance to approved bathroom layouts.
Discuss project requirements →
Premium Residential Bathrooms
Review smart-toilet power and service needs before selection.
Discuss project requirements →
Retail Showrooms
Present standard, slim and smart categories with clear specification notes.
Discuss showroom requirements →
Product definition
What Are Toilets?
Toilets are bathroom fixtures selected to receive and discharge waste through a coordinated sanitary and water connection arrangement. Depending on the approved model, the supplied scope may include a toilet body, seat, cover and flushing components. The selection must coordinate with installation type, rough-in, drain and water connection, overall dimensions, usable clearance, finished floor or wall conditions, project service route, smart-model power and local requirement checks. A drawing, approved sample, technical sheet or confirmed model should define final scope.
Do not assume a seat, cover, cistern part, flush component, power connection, installation service, accessory or local approval is included unless the written quotation names it.
Not the same as
- A complete bathroom package including every visible component
- A substitute for confirming rough-in, drainage and water conditions
- A substitute for destination-market plumbing or installation verification
Decision guide
Toilet Comparison
Compare category, planning variables, project fit and the confirmation point before ordering.
| Approach | Installation or integration | Typical project fit | Buyer confirmation point |
|---|---|---|---|
| Standard toilet | Selected around the approved installation, rough-in and flush arrangement. | General residential, hotel and project bathroom packages. | Model, rough-in, clearance, water connection and supplied scope. |
| Slim toilet | Compact profile coordinated with the approved room layout and clearances. | Apartment bathrooms and compact layouts. | Overall dimensions, clearance, rough-in and finished interfaces. |
| Smart toilet | Model-specific fixture coordinated with power, service and applicable requirements. | Premium residential bathrooms and selected project specifications. | Selected model, power and service provision, components and local checks. |
RFQ checklist
Toilets Sourcing Checklist
Identify the exact toilet model and installation kit before requesting a price. A pan image does not tell a site team which frame, cistern, seat or flush control is included.
- Installation familyChoose floor-standing or wall-hung before comparing silhouettes.
- Waste orientationShow the floor or wall outlet and measured rough-in from finished surfaces.
- Frame or base supportConfirm the wall frame or floor fixing route for that model.
- Flush componentsName the cistern, valve or flush plate required with the selected pan.
- Seat identitySpecify the matching seat and cover model, not only its color.
- Supply pointLocate water inlet relative to the selected cistern or smart seat.
- Powered-seat provisionIf applicable, give the responsible trade the electrical position and service plan.
- Usable clearanceCheck leg space and door movement on the finished room plan.
- Kit contentsAsk for a model-by-model list of every part included in each carton.
- Local reviewProvide the target market and assign review of plumbing and electrical rules.
Factory-backed coordination
Work With WNS Global
For toilets, WNS Global manages the selected external production route and export coordination. The buyer’s project team verifies rough-in, structural fixing, water and any electrical provision for the destination before approving the model.
Inquiry Package
Share drawings, category, rough-in, clearance, model reference, finish direction, quantity and target market.
Technical Alignment
Review installation, interfaces, component scope, model information, service needs and reference clarity.
Order Communication
List every included toilet component by model so procurement and the site read the same scope.
Handover
Provide the outlet drawing and labeled installation parts to the receiving trade.
Exact availability, finishes, commercial terms and delivery details remain subject to written confirmation for the selected order.
About WNS Global
Buyer questions
Toilets FAQ
Model-dependent points should be confirmed through the selected product reference and approved project documents.
Start with standard, slim or smart direction, then confirm installation type, rough-in, room clearance, water connection, selected model and supplied scope on the approved reference.
Share room drawings, finished dimensions, rough-in, drain and water positions, selected category, model reference, quantity, target market and latest document revision.
Do not assume supplied scope. Confirm every included and excluded toilet body, seat, cover, flush component, cistern part, power-related item and accessory in the written quotation.
WNS Global can review model appearance, color or finish direction where feasible, seat or cover scope, branding or packaging discussion and project feasibility subject to approved reference and order confirmation.
Inspection follows the agreed order scope, including ordered model and components, visible surface condition, dimensions, rough-in reference, agreed function check, marking, packing and technical documents.
The buyer or responsible project team should verify destination-market requirements for plumbing, water, drainage, electrical work for smart models, installation and any local approval.
Learn before you buy
Toilet Guides
Flushometer Toilets: Match the Bowl, Valve and Water Supply
A flushometer bowl and valve only work as a matched pair on an adequate supply. Check rated flush volume, spud type, valve type and pressure before specifying.
Toilet Seat Top vs Bottom Fixing: Can the Fasteners Be Reached?
Bottom-fix seats tighten from under the pan; top-fix seats tighten from above. Check access, hole spacing and the named seat before ordering replacements.
Pressure-Assisted vs Gravity Toilets: A Different System
A pressure-assisted toilet flushes with air compressed in a vessel in the tank. Flushmate says its unit needs a bowl designed for it. Check the model.
Rimless Toilets: Review the Rinse System, Not Just the Rim
Rimless names a bowl without an enclosed flush rim, not its water path. Compare how makers describe the rinse, the paired flush system and the evidence.
Toilet Fill Valve vs Flush Valve: Identify the Service Part
The fill valve refills the cistern; the flush valve releases the water. Compare the types of each, find the cistern model and order the listed spare part.
Replacement Toilet Seats: Match the Bowl and the Fixing Interface
Match a replacement toilet seat to the bowl model, then to hole spacing, hole-to-front length and width. Maker figures for round and elongated bowls.
Can a Flush Plate Be Mixed with a Different Concealed Cistern?
Choose a flush plate only from those its maker lists for the installed concealed cistern. Identify the cistern first, then check actuation and kit parts.
Toilet Rough-In and Waste Outlet: Which Reference Points Matter?
Match a toilet to the site by its reference points: floor or wall outlet, the finished wall, the outlet center or floor bolts, and the water supply.
One-Piece vs Two-Piece Toilets
A seam, and everything that follows from it.
How to Plan a Small Bathroom Layout
Draw the empty space first. The clearances are what fill the room.
How to Specify an Accessible Bathroom
Approach, transfer and reach decide the plan before any fixture.
Common Bathroom Installation Mistakes
Five errors, all decided weeks before anyone picks up a drill.
Bathroom Ventilation and Furniture Durability
Most furniture damage is caused by air, not by splashes.
Project inquiry Sanitary ware wholesale orders and single project schedules are handled by the same team.
Request Toilet Details
Use Your Request to share your quantity estimate, drawing, reference photo, required finish, target market or required date where relevant. WhatsApp is the faster contact route for a first discussion.
- WhatsApp+86 178 2555 7838
- Emailtong.li@wns-global.com